Austin Logo - Home Page

 

Austin Navigation
is an authorized
distributor for
Flash Technology

Home

Contact Austin

Return

 
Medium Intensity Lighting

Flash Technology products consistently provide lighting that operates within or exceeds regulatory guidelines, and run maintenance-free for long periods.  

FlashTech 301

White strobe for day and white strobe for night - structures 500' above ground level (AGL) or less.   Use of a white strobe for day marking eliminates the need to paint the structure.


FlashTech 309

Red quartz halogen beacon for night.   A direct replacement system for conventional red incandescent (L-864) beacons operating at 1/3 the wattage.   Structure painted for day and red quartz halogen beacon for night - any structure regardless of height.   The 309 offers the following advantages:
• Power consumption is 65% less than conventional incandescent beacons.
• Beacon weighs only 23 lbs. making it easier to install and wind load is reduced to less than one square foot.


FlashTech 310

White strobe for day and white strobe for night.   Available with interface to create a dual-mode system.   For structures 500' above ground level (AGL) or less.   Use of a white strobe for day marking eliminates the need to paint the structure, and repaint it when color fades.


FlashTech 311

White strobe for day, red incandescent beacons at night and built in red light controller to replace exisiting red light controller to create a dual system.   For structures 500' above ground level (AGL) or less.

Use of a white strobe for day marking eliminates the need to paint the structure, and repaint it when color fades.


FlashTech 312

White strobe for day and red strobe for night.
An exclusive, revolutionary design by Flash Technology, the FlashTech 312 produces both red and white light with just one flashtube.   Using one tube dramatically reduces operating expenses by reducing tube cost.   The FlashTech 312 has the lowest power consumption of any dual system, 90% less than conventional incandescent beacons.


FlashTech 314

Structure painted for day and red strobe for night - any structure regardless of height.   A strobe replacement for conventional red (L-864) incandescent beacons.   The FlashTech 314 offers the following advantages:
• Power consumption is 90% less than conventional incandescent beacons.
• Flashhead weighs only 17 lbs. making it easier to install and wind load is reduced to less than one sqare foot.
• Conduit is not typically required between the power converter and flashhead.


FlashTech 317

White strobe for day and white strobe for night (catenary).   White strobe for day and white strobe for night - structures 500' above ground level (AGL) or less supporting overhead cables and wires suspended over canyons, valleys or waterways (catenary).   The unique flash rate and sequence designates structures supporting overhead wires (catenary).


FlashTech 324

Dual-Strobe System - White strobe for day and red strobe for night.   A dual-strobe system that provides a white strobe for day operation and a red strobe for night operation.   Power consumption is 90% less than conventional incandescent beacons.


FlashTech 131 Eagle Inteface

Eagle remote monitoring interface, for remote monitoring any medium intensity obstruction lighting system regardless of manufacturer.


FTM 5000

A remote telemetry unit, the FTM 5000 allows companies with multiple, unstaffed, remote sites to monitor and control a variety of equipment and operating conditions.
· Complete diagnostic capability.
· Monitoring and control of Flash Technology equipment.
· Monitoring fluctuating levels of capacity, such as the amount of fuel left in a fuel tank.
· Monitoring fluctuating operating conditions, such as room temperature.
· Monitoring ingress and egress to facilities.
· Monitoring and controlling lights.
· Monitoring for signs of equipment failure.
· Controlling equipment, such as turning a generator on and off.

   
Return
 
 

Copyright © 2003 Austin Insulators Inc.